How to take care of a snake plant indoors

By: Lily Hannigan. Publisher: Bloombox Club. The Sansevieria genus varies greatly in terms of appearance, but all varieties are known for their hardiness. Sansevierias are probably the best succulents at adapting to indoor environments. Because succulents tend to come from hot, bright areas, some varieties - such as Haworthia cooperi - can struggle if they're brought into a less than bright home and become 'etiolated.

  • Mother-in-Law’s Tongue (Snake Plant): Care and Growing Guide (Sansevieria Trifasciata)
  • Snake Plant Care: Meet the Ultimate Entry-Level Houseplant
  • How to Care for a Mother-in-Law’s Tongue (aka Snake Plant)
  • August 2015: Mother-in-law’s tongue is Houseplant of the month
  • Snake plants 101
  • Snake Plant Guide: How to Care for a Sansevieria Houseplant
  • Sansevieria: Snake Plant
  • How to Grow Snake Plant Indoors | Snake Plant Care
  • How To Care For A Snake Plant
  • Snake Plant Care & 5 Amazing Benefits of Sansevieria
WATCH RELATED VIDEO: 10 tips for taking care of a Snake Plant - Donna Joshi

Mother-in-Law’s Tongue (Snake Plant): Care and Growing Guide (Sansevieria Trifasciata)

The Snake Plants are an ever increasingly popular house guest and much of this has to do with its near indestructible qualities. However this plant is also desired for its upright and erect leaf habit which fits into almost all locations in the home from both traditional to modern decor. It belongs to the family Asparagaceae, native to the tropics of West Africa.

A lot of people believe the name comes from " Sand Snake ", with its cacti like properties and appearance of a rising snake it's not hard to see why. However, the plant genus was actually named in by the Swedish naturalist Carl Thunberg after Raimondo di Sangro , Prince of San Seviero. As a result of modern day improvements with DNA studies, in the plant was officially removed from the Sansevieria genus and moved into the Dracaena genus.

This was the result of botanists discovering a high number of common genes between the plants. Sansevieria Vs Dracaena As of , we've decided to continue the use of "Sansevieria" on our website. Simply because the name is still being heavily used in informal settings and therefore it's much more familiar to our visitors.

For many fans of this plant, the change in genus was a shock - even to us. Visually the similarities to the better known plants within the Dracaena genus think the Dragon Tree or the Corn Plant are remote at best. So there has been a fairly slow uptake in using the new name in more casual and informal settings. Ultimately however the truly recognised genus within science is Dracaena , so expect this name to become more used in years to come. It's bold and clutter-free lines make it very popular and one of the plants of choice for architecture and interior design, especially because of its reputation as an improver of indoor air quality.

It's an ever increasingly popular indoor plant and much of this has to do with its near indestructible qualities. There are a huge number of different Sansevieria's varieties out there which you may be able to get your hands on and if you get the chance you really should.

Some are easy to find, others less so. This is only a small section as there are over 70 and counting different types available. Below are some of our favorites which also seem to be the most popular and therefore some of the more common varieties you'll come across.

This is the most famous and easily recognised of all the Sansevierias. Traditionally it was used as a striking background for smaller plants with flowers or ferny foliage. The modern trend in the average home is to keep the plant separate from others and have it standing bold and alone. Larger homes or offices might also adopt elements of this style as a way to divide sections of the space.

Trifasciata means " three bundles " and this can be seen in the leaf markings of these plants. The Laurentii cultivar has leaves that are edged on both sides with solid lines of vertical yellow, in the center, there are normally two different shades of horizontal zig-zag green stripes.

Bantels Sensation is similar to the Trifasciata laurenti i as it has all the same colours, but it's different as the stripes are vertical instead of going across the plant. It's a funky and stylish twist on the traditional take. Still quite new, so it might take a bit of searching to find it. This variety is actually the same as Laurentii without the Laurentii! This means you are left with a plant without any of the yellow edges. This might make it less desirable and of interest to look at, but it still has the upright and hardy attitude of its cousin and the attractive horizontal green stripes.

If you want to go even darker, then look for Trifasciata "Black Coral" which has grey, almost black hues in places. While all Sansevieria are accommodating with wherever you put it, the Laurentii yellow will fade somewhat if you put it in heavy darkness. As Trifasciata has no yellow edges to lose it's therefore even more tolerant of shady conditions. If you take leaf cuttings of Trifasciata laurentii it will normally revert to this all green Trifasciata , i.

Again Cylindrica has very upright and strong green leaves. The leaves, as you may be able to guess by it's name, are cylindrical in shape and are incredibly tough. Interesting Fact The leaves on this variety are so tough and ridged, it's not actually possible to bend the leaves once they've matured without snapping them. The newer growth is pretty flexible though and will also bend strongly towards light sources if grown in a dark place, but once mature they're much thicker and strongly anchored into their pots.

This gives incredible strength to the plant and resists damage so it could make for a great plant in an area with a lot of footfall. This unusual style alone is enough for some people, but its natural inclination to bend towards the light when the new flexible growth forms is exploited by nurseries, the picture on the right below shows you how.

As the plant has grown, the leaves have been plaited together. Six of the fleshy leaves have been used to create this plait, you can also find more complex and larger designs although they will obviously cost more. Some people argue this trick is a fad. They might be right, but it's still a very unique fad you have to agree. The drawback is that just before they are shipped from the nursery to the shop for you to buy, the top tips are often "knocked" or picked off.

The majority of plants have a hormone that is produced in the top of the main stem, this hormone encourages upward growth through that particular individual leaf. When the top has been removed no more hormone and therefore no more upward growing, this results in growth from the side shoots lower down the plant. Cylindrica has no side shoots so it starts producing new leaves directly from the soil.

So eventually your beautifully sculptured plait will look out of place surrounded by untrained natural growth. On the plus side, like all Sansevieria , Cylindrica is slow growing so you'll still have your architectural design for quite a while. After all the attention grabbing and elegance of the previous three Sansevieria varieties, Hahnii is perhaps quite basic looking. Whilst like its cousins in the hardy and interesting to look at stakes, it has much less curb appeal.

The reason for this lack of popularity is down to the fact that it doesn't grow very high or wide and is simply dwarfed by it's more vibrant and bigger cousins. Don't write it off though, because it's brilliant if you don't have a great deal of space but enjoy the cacti like appearance with the unusual variegation found on the Laurentii. It also comes in a Trifasciata form so all the marbled greens but none of the yellow edges.

This is the perfect plant for those tight awkward places or even to fill a space on a windowsill. If this compact look appears to you, check out Hahnii Black Dragon. No variegation at all, just pure dark green. New leaves are a jade colour but darken overtime. It's not eye-catching, but I've found it grows very fast and quickly fills a pot. Fernwood and Fernwood Mikado are two similar looking plants that are fairly modern hybrids but they've appealed to buyers and are fast becoming popular Sansevieria varieties.

Not growing anywhere near as large as their more famous cousins, they maintain a dainty and slender appearance. The leaves on both are fairly thin and nowhere near as thick or tough as those found on the Cylindrica African Spear. The leaves on the Fernwood are normally concave shaped and form in dense clumps, often with many leaves per stem that create an arching and full looking appearance. We used several Mikado plants as the focus of our living plant wall in a windowless hallway.

Check out the link for more. The Mikado leaves are usually fully cylindrical and also form in clumps but in a much sparser way. They also only have single leafed stems, so a full pot will look much less loaded and perhaps more elegant than the Fernwood. Of the two the Mikado is usually the smaller and takes up less space.

Both varieties grow slowly and have similar mottled green markings. They're both also very tolerant of low light conditions.

We really love most Sansevieria plants as they share common traits in terms of easy care needs and most brought for the home have an architectural look that just makes them striking and attention grabbing.

But the Victoria took it to another level. Often sold as a thin but very large sole single leaf stem it's just gorgeous and unique.

The common names are easy to see as the shape of the leaf is that of a Whale or Sharkfin. They tend to have the common mottled green familiar on most Sansevieria's, mature plants or those grown in lower light conditions tend to be darker.

The edges will normally have a very thin red or orange outline. Over time it's common for a new leaf to grow from beneath the soil which gradually unfolds and will join the existing leaf. Ours in the picture above produced its first "baby" or offset after about 6 months. The Victoria variety can be painfully expensive to buy as their rarity in most garden centers means they command a premium from online sellers.

However if you really love the look of this one don't be put off by the price. Like all Sansevieria, the Whale Fin plant shares the easy going nature of its cousins so this should be a difficult to kill houseplant, making your investment worthwhile.

Just follow the care instructions later in our article to increase the chances of yours living to a good old age. This is another fairly new Sansevieria being more frequently sold. It has the strong thick stems of the Cylindrica and the growth habit of the Fernwood with stems growing in random directions to create a very pointed literally talking point.

You can grow just one offset by itself to create a living piece of art or have several growing in the same pot as shown above to create a cluster of activity. Both have their places and further adds to the charm of the plant. Growth is pretty slow but as with all the other varieties it's tough going and will put up with substandard care with very few complaints.

If you like this "starfish" look, there is also another one you might want to try called Sansevieria boncellensis. It's very compact and has less reach than the Sansiam Sharbiki, but it's cute and perfect if you want a dainty but sturdy one for your collection.

Another fairly new variety in the shops, the Moonshine brings us full circle and back to the more traditional looking Snake Plants with the upright, long and broad leaves, growing in packed clusters. The main difference here is the leaf color has a "moonshine" appearance dropping the usual green mottled and marbled effect, and giving us an almost flat and solid light silvery green coloring.

Faint bands normally exist on the leaves and the edges are outlined in a darker green to highlight the main leaf color. One drawback. The Moonshine variety is not tolerant of very low light conditions. Oh it will survive perfectly fine in such places don't worry about that, but it will quickly lose the washed out and beautiful light coloring in the leaves. The plant in the picture above has been grown in low light conditions for around 3 months and has darkened a little.

However when we first brought it, it was much lighter.

Snake Plant Care: Meet the Ultimate Entry-Level Houseplant

Some varieties have leaves with thick, buttery yellow edges, while others have striking dark green stripes. Succulents are known for being hardy, and snake plants are no exception. Snake plants are native to tropical West Africa and are an important part of African culture. Nigerians believe that the plant provides spiritual protection.

Caring for a snake plant is very simple. It is a succulent so it does not require much water or humidity. You should wait to water the plant.

How to Care for a Mother-in-Law’s Tongue (aka Snake Plant)

The mother in laws tongue also known as snake plant is a flowering species which is primarily grown for it's slick sword like long leaves. This is a slow growing plant that anyone can grow because of it's low and high sun light tolerance and ease of watering. The only way growers can cause this plant serious problems is if they over water or allow the plant to reside in very cold temperatures for long periods. The sansevieria trifasciata picked up the name mother in laws tongue from the sharpness of the evergreen sword like leaves that grow in an upward fashion. As mentioned above this plant is a flowering type, however, grown indoors it's fairly hard to encourage flowers not impossible. Varieties: There is a number of these succulent type varieties available that includes, golden edged leaves, white edged and the green and grayish mottled type. The golden edged leaf S.

August 2015: Mother-in-law’s tongue is Houseplant of the month

Select is editorially independent. Our editors selected these deals and items because we think you will enjoy them at these prices. If you purchase something through our links, we may earn a commission. Pricing and availability are accurate as of publish time.

Cylindrical Snake Plant is an African succulent that makes a carefree house plant. Round leaves with a dark-green striped pattern give this eye-catching succulent its common name.

Snake plants 101

Houseplants have the power to magically transform your space and make it look vibrant and fresh. They are easy to maintain and add greenery to the room. When it comes to the types of houseplants, one of the most common indoor plants is the snake plant. Snake plants are desert plants and like heat and humidity, which makes them the perfect plant for indoors. There are various other types of snake plants. Some of them include Black gold, Birds nest, Fernwood, and Black coral.

Snake Plant Guide: How to Care for a Sansevieria Houseplant

Mother-in-Law's Tongue also known as Snake Plant is one of the most carefree house plants you can grow. It thrives in just about any light. Prefers dry air and soil. Rarely needs repotted. This succulent house plant grows stiffly upright variegated leaves. Some varieties have leaves that are edged with yellow or white. Its compact, rosette form gives it the common name Bird's Nest Sansevieria. Clusters of small, white flowers sometimes grow at the base of a plant when it is a few years old.

About Snake plants. If you've never taken care of a plant before and want an easy start, the snake plant is the one for you. You.

Sansevieria: Snake Plant

Plant Care Today. Sansevieria grows best in bright indirect light. Snake plants will grow outdoors in full sun or indoors in low light areas.

How to Grow Snake Plant Indoors | Snake Plant Care

Water once a week or when the soil starts to become slightly dry at the top. Keep the soil lightly moist at all times, but do not overwater as this will cause brown spots and leaf drop. Curly or dry leaves suggest, the plant is dry and needs watering. Water in the early morning or late evening when temperatures are cooler. Always check your soil before watering.

While some plants are fairly high-maintenance and borderline dramatic cough, cough: the fiddle-leaf fig sansevierias, known also as snake plants or mother-in-law's tongues, are the quite the opposite.

How To Care For A Snake Plant

It is not only popular because of the way it looks, but it also holds many health benefits, one of which is its air purifying ability. It can remove air pollutants and VOCs like formaldehyde, benzene, toluene, and xylene from indoor air, which has been proven in many studies— NASA clean air study is one of the examples. Other names: St. There are approx 70 sansevieria species in existence. But the most popular one among them is Sansevieria trifasciata, which is also known as common snake plant. Some other important sansevieria varieties are:.

Snake Plant Care & 5 Amazing Benefits of Sansevieria

From the right kind of containers to plant them in to watering tips and more, gardening experts share their advice. Technically dubbed sansevieria , snake plants are one of the most popular houseplants in all of North America. According to Marc Hachadourian , the director of glasshouse horticulture at the New York Botanical Garden, this variety is the current moment's "it" succulent. It's even survived a house fire.

Watch the video: How to grow Snake plant faster, Propagate and Care Indoors.

Previous Article

Raphis palm plant care

Next Article

Starting landscaping business advice